Roff Hyseal

Crystalline waterproofing compound

Prevents water leakage when used as a waterproof coating for concrete water tanks, sunken slabs of bathrooms and toilets, basements, lift wells, inspections pits and underground structures. Particularly effective for basement waterproofing.

Highly alkaline cementitious powder-based waterproof coating.

Hytite by Roff.in
Hytite by Roff.in

STEP 1

Brush and clean the surface thoroughly to remove all loose particles, release agents, dust, curing compounds and other surface contaminants. This will expose the bare concrete pores.

Hytite by Roff.in

STEP 2

The prepared concrete surface should be wetted with water to achieve a saturated surface dry condition before the application of the coating.

Hytite by Roff.in

STEP 3

Properly mix Roff Hyseal with water in the proportion of 2.5:1 (powder:water) by volume with a slow speed drill machine to get a brush-applicable consistency.

Hytite by Roff.in

STEP 4

Apply the first coat of the slurry prepared on water-saturated wet concrete.

Hytite by Roff.in

STEP 5

Apply a second coat when the 1st coat is still  tacky in direction perpendicular to the first coat.

Hytite by Roff.in

STEP 6

To allow the effective penetration of Roff Hyseal into the concrete, curing with water must be thorough and continuous for more than seven days.

  • Easily applied with a brush.
  • Works on the crystallisation process principle.
  • High penetration into the capillaries of concrete.
  • Resists water penetration and leakages.
  • Prevents water leakage from the positive and negative sides of the structure.
  • Ideal for basement waterproofing.

Roff Hyseal-Brochure.PDF

First Name (required)

Last Name (required)

Profession (required)

Email (required)

Contact